| Specifications - MN/CNC Lathes | TMX28"CNC |
| Swing Over Bed | 28" |
| Swing Over Cross Slide | 18" |
| Control | Fanuc 0i-T |
| Distance Available B.C. | 57"-195" |
| Built in: | Taiwan |
| Main Drive: Continuous / 40% Duty | 15 / 20 hp |
| Spindle Bore, Std. | 4.1" |
| Optional Spindle Bore | 5.1", 6.2" |
| Speed Range, Std. Spindle Bore | 40-2000 rpm |
| Max. Load Capacity bc | 4,600 lbs |
| Rapid Traverse Rate, Z-Axis | 393 ipm |
| Carriage length bearing on bedway | 22" |
| Tailstock Quill Diameter | 4.1" |
| Tailstock Quill Taper | MT 5 |
| Bed Width / *TRI-V Bedways | *16" |
| Machine ~Weight x 78"bc | 11,000 lbs |
Features
- Taiwan built
- Factory raised series for 18" OCS
- 16" wide TRI-V bed design
- Low cost
- 3 range Auto -shifting headstock
- Fanuc control
- Spindle speeds to 2000 rpm
- Gap bed design to hold larger disc parts
- Tailstock with 4.1"dia. Quill
- Up to 5,000 lbs bc with steadies
- Heavy duty tailstock with 3.9"dia. Quill
- Independent traveling panel
- Come-along tailstock
- Full guarding
- Isolated hydraulic system
- Hardened and Ground Cross slide
- Meehanite grade castings
- 20 HP
- 4.1" bore
 |
|---|
Toolmex Machine Tools |
|
|---|
Toolmex Machine Tools |
|
|---|
Toolmex Machine Tools |
|
|---|
Toolmex Machine Tools |
|
|---|
Toolmex Machine Tools |
|
|---|
Toolmex Machine Tools |
|
|---|
Toolmex Machine Tools |
|
|---|
Toolmex Machine Tools |
|
|---|
Toolmex Machine Tools |
|
|---|
Toolmex Machine Tools |
|
|---|
Toolmex Machine Tools |
|
|---|
Toolmex Machine Tools |
|
|---|
Toolmex Machine Tools |
|
|---|
Toolmex Machine Tools |
|
|---|
Toolmex Machine Tools |
All specifications & data are subject to change without notice. Photos are a general representation of various models and may include optional equipment. Guards are removed for photo purposes only.
